RC Comp Lug Nuts
RC Comp Series 12 Point Billet Aluminum Lug Nuts are manufactured from domestic 7075 material and come in polished aluminum and black anodized with a machined contrast cut. These billet lug nuts are available in a wide range of sizes including metric and offer a great complement to your racing wheels.
SPECIFICATIONS
| Thread Size & Type |
Shank Length |
Shank OD |
Socket |
|---|---|---|---|
| 7/16" Short Shank |
0.460" | 0.687" | 3/4" 12-Point |
| 1/2" Short Shank |
0.460" | 0.687" | 3/4" 12-Point |
| 5/8" Flat Bottom |
n/a | n/a | 15/16" 12-Point |
IMPORTANT!!
Make sure the threads on your studs are clean and not damaged in any way.
Anti-seize is included with all RC Comp lug nuts. You must use this to prevent marring.
Nuts should be started by hand to prevent cross-threading.
Stud threads should protrude a minimum of 1/8" out of the lug nut when fully torqued.
Do NOT over torque your lug nuts as this can create an unsafe situation.
Aluminum lug nuts are for racing applications only and are not recommended for OEM/Street use.
Recommended Torque Values - using anti-seize
12 mm Lug Nuts - 85 ft lbs
14 mm Lug Nuts - 85 ft lbs
7/16" Lug Nuts - 85 ft lbs
1/2" Lug Nuts - 85 ft lbs
5/8" Lug Nuts - 100 ft lbs
