The Generator Slide Out Kit is simple to install and has a weight capacity of 500 lbs. This kit makes repairs on your generator easier by keeping the generator closer to your height without having to remove it from the trailer. The slides also have locks to keep the generator from moving around during travel.

1. G33/26/24, 33”W x 4.2”H x 26”D
   (The bottom base is 33” wide, the top half that slides is 31” wide)

2. Capacity 500lbs. (This is weight evenly applied across the entire length of the slides, if all 500lbs is placed on the very edge when fully extended, expect it to fail.)

3. The slides lock in the closed position and the open position. You must operate the release lever to move it.

*The trailer openings lower lip clearance is 1”. The brackets have enough room to raise the slide another 1” by simply drilling new holes and mounting the slide higher on the lower mounting bracket.

*Slides are 24” and the lock levers add another 1-3/8”.